NV412A-ADT Video Encoder
The NV412A digitizes video signals and streams digital images directly to the ADT Pulse wireless system.
NV412A-ADT Video Encoder |
|
 |
|
| Manual | NV412A-ADT Video Encoder Installation Manual |
| Reset | The device can be reset when the video encoder is in the ready mode. Using a pin or paper clip, press and hold the reset button for at least 10 seconds. The communication configuration settings of the video encoder reset to the manufacturer's settings of the video encoder reset to the manufacturer's default settings. |
| Troubleshooting |
|
| Specifications |
|
| Compatibility | No known incompatibilities |
| Communication | This device must be connected to a modem or router using an Ethernet cable. |
| Pulse Enrollment |
This device can be enrolled through the Manage Device section of the Web or Admin Portal. This device must be paired to Pulse while it is wired to the gateway using the provided adapter. For help enrolling your camera, please refer to the Pulse Camera Add On and Replacement page. |
