Silence Low Battery Beeping
A Low Battery Warning is most often displayed as BAT, LOW BATT or SYSTEM LO BAT on the touchpad. In addition, many systems will "beep" or "chirp" to alert you that a system or sensor battery is low. This warning signals that your battery must be either recharged or replaced.
On most systems, low battery trouble beeps can be silenced by entering one of the following sequences on the keypad. If you do not see your system below, please refer to your system manual.
Unsure which system is yours?
- While logged into MyADT, click on the Alarm System tab on the left.
- In the Alarm System tab, it will display the name of your system on the top and an image of it to the left.
- If the image of your system doesn’t look like yours, click the Not your system? Button to identify your system.
Common Silence Beeping Keypad Combinations
Command All-in-one |
Command Hybrid |
Command 2x16 |
 |
 |
 |
On the touchscreen, tap [Disarm] + enter [security code], then tap [Disarm] + enter [security code] |
Enter [security code] |
Enter [security code] |
DSC Impassa |
Safewatch Pro 3000 |
Safewatch QuickConnect Plus |
 |
 |
 |
Press [#] |
Press any key |
Press any key, or enter [security code] + [OFF] |
Total Security |
Ademco 20 |
Ademco Lynx |
 |
 |
 |
Press [OFF] |
Press any key |
Press any key, or enter [security code] + [OFF] |
Ademco Vista 20P |
BHS 3000 or BHS 4000 |
Concord 4 |
 |
 |
 |
Press any key |
Press [CANCEL], [CANCEL] |
Press [*] |
DSC PC 1555 |
DSC PC 1864 |
ITI Concord Express |
 |
|
|
Press any key |
Press [*] |
Press [1] + [security code] |
Simon XT |
|
|
 |
||
Press [STATUS] |
|
|
Related Topics
Bypass a Zone
Information on how to bypass a zone on the most common ADT systems.
Testing Your System
Here are instructions for placing your system in Test mode, and for removing it from Test mode once the test is complete.
Identify Your System Battery
Identify which battery goes with your system.
