iCamera 1000-ADT

iCamera 1000-ADT

• Reboot - If your camera is unresponsive or is encountering technical issues, you may need to reboot your camera. To reboot, press and release the Reset button.
• Clear All Data - If rebooting your camera does not resolve the issue or if you need to re-enroll your camera to Pulse, you may need to clear all data. To clear all data and restore the factory default settings:
  1. Power on the camera
  2. Press and hold the Reset button for eight seconds
  3. When you release the Reset button, the iCamera is ret to the factory default settings.

• Wi-Fi Camera Offline - Please refer to this page if your Wi-Fi is not connected and is listed as "status unknown" in the ADT pulse app.
• Camera Video Quality - Please refer to this page if you are encountering issues with your camera's video quality.
• Pulse Gateway Offline - The video gateway controls your wireless connections. Please refer to this page if your device is offline or is receiving a "Status Unavailable" message.

• Dimensions:  2.8" (W) x 2.8" (H) x 0.8" (D) w/out Stand
• Operating Temperatures:
  • Outdoors: -4ºF to 113ºF
  • Indoors: 32ºF to 113ºF
• Video Compression:  H.264, MPEG4 and MJPEG
• Network Interface:  1 Ethernet 10/100BaseT (RJ45)
• Storage Temp:  -4ºF to 140ºF
• LEDs: 1 LED indicator and 12 IR LEDs
• Power Adapter:  12VDC, 1A